Re: Intel SSD 530 not re
To you most recent questions. I checked in the BIOS as part of the install process and the drive is not set to RAID. The drive is connected to a Marvel Controller. The PC at the moment is located in...
View ArticleRe: Intel SSD Toolbox has stopped working V3.2.1 and V3.2.3
Thanks for the info - hopefully that will help others that come across this thread.However, I don't have Microsoft Security Essentials loaded.I've also tried disabling my anti-virus and windows...
View ArticleRe: Convert 65W i5-2405S to 95W and other questions
Okay, I answered some of my own questions. I changed Burst Mode Power Limit to 118 and Sustained Mode Power Limit to 95, but the four Core Ratio Limits are not editable. I do not pretend to understand...
View ArticleConvert 65W i5-2405S to 95W and other questions
I have a DH67CL / i5-2500K PC. It has a 650W Gold power supply and no graphics card, so power is never an issue. It has Noctua CPU cooling. I also have a DH67BL / i5-2405S PC. It has a 650W Bronze...
View ArticleClik here to view.
Re: ASUS PB287Q 4K Monitor with D54250WYK
Hi, here is the link I was referring to. I now own a PB287Q and can confirm that it runs without any problems at 3840x2160 @30Hz. I guess the trouble I have with this is that Intel has always...
View ArticleConnecting 802.11ac laptop to wireless network causes other devices to...
I have a b/g/n tplink wireless router set up with WPA2 security and DHCP enabled. I have several devices connected to it. The laptops (all win7) have b/g/n network cards. However, when I connect the...
View ArticleRe: Connecting 802.11ac laptop to wireless network causes other devices to...
Try disabling U-APSD support on 7260's settings and see if it still makes the router drop WiFi.
View ArticleRe: Intel NUC D34010WYK cannot get to BIOS.
Hi Sylvia,I have tried all the bioses you mentioned, and still the same issue, the keyboard is not being initialised before being presented with the F2 F7 F10 prompt. It seems to me, that there is a...
View ArticleQuestion about temperatures: D54250WYKH1
I wanted to see if anyone knew whether the Intel i5 NUC's are in a representative idle state while in the BIOS? Based on my experiments, I am thinking that when it is in the BIOS, any power saving...
View ArticleRe: Intel NUC DN2820FYKH & USB Flash Drives
Thanks for your response Allan. It is at the current BIOS - will await a further version
View ArticleClik here to view.
Easy temperature measurement with the LM35
One of the easiest ways to implement a temperature sensor on the Galileo (I'm using the Gen 1 board) is to use an LM35DZ. This inexpensive chip delivers an analog voltage proportional to the...
View Articleintel core i7 4930k compatible with intel DX79TO motherboard?
In Intel`s webpage i read that the i7 4930k isn`t compatible with Intel DX79TO motherboard, both boxes says that they are LGA2011 compatible , in a lot of computer webpages i found that they can be...
View Articleintel core i7 4930k compatible with intel DX79TO motherboard?
In Intel`s webpage i read that the i7 4930k isn`t compatible with Intel DX79TO motherboard, both boxes says that they are LGA2011 compatible , in a lot of computer webpages i found that they can be...
View ArticleClik here to view.
Re: please, help me about Opencv Error in yocto build.
Hello, Bill. I find Opencv 2.4.9 md5 code at Sourceforge.net I want to apply md5 code for opencv_2.4.3.bb file..
View ArticleIntel BXTS13X Liquid Cooling air flow direction
I'm new to liquid cooling and just installed an Intel BXTS13X in my corsair 540 case. What I'm wondering is should the fan be pushing air over the radiator? or pulling air across it? (i read elsewhere...
View ArticleRe: NUC DN2820FYKH won't boot from anything
I am not from Intel but I bought that NUC and had experiences which could be like yours, so I will try to help. My NUC arrived with an early BIOS, and that BIOS would not let me type from any of my...
View ArticleGalileo: Pushing kernel modules
Hi, I have built the linux for Galileo [BSP 1.0.0 package] and it's booting fine, I have customized a driver and built it as a module, I want to know how I can push it into the Galileo.USB connected to...
View ArticleRe: Galileo: Pushing kernel modules
I went through Alex's Blog on how to build the kernel an all."Reconfiguring Linux kernel and adding drivers into Galileo's Linux image" but my SSH /SCP is timing out, & I am not able to see any...
View ArticleDH67CL: BIOS 0131 allows WEI to see graphics overclock, but not BIOS 0146
I have two PCs with DH67CL and i5-2500K. One has BIOS 0131 and the other 0146. I seem to remember that 0146 was the first one to include Ivy Bridge support, but maybe I'm wrong. 0146 is no longer...
View Article