Galileo rtc wake-up possibilities ?
I read in the Quark Datasheet: "The RTC supports a date alarm that allows for scheduling a wake up event up to 30 days in advance." Can you really wake up the Galileo using the date alarm ? I will look...
View ArticleClik here to view.
Windows 8.1, HD 4600, Audio not showing full HD Capabilities
I have an Asrock Z87 Extreme6 running a 4670K and Windows 8.1 Pro. My AV receiver is an Onkyo TX-NR626 and is DTS-HD capable, connected via HDMI. However Windows only shows DD, DTS and DD+. I have the...
View ArticleRemovable Drive Not Showing Up
I don't know for sure if this is an Intel issue or a Windows issue: I have a DZ68BC MB at BIOS 0039, which seems fine.I have four SATA devices in the system now C:120GB SSD, F:1.5TB, D: 0.5TB, E: DVD...
View ArticleRe: igdkmd64.sys DRIVER_IRQL_NOT_LESS_OR_EQUAL BSOD (Win 8.1 64), updating my...
Well, contrary to what I was intending... I have only played 2 games of league in the past 3 or so days. No blue screens have occurred...yet.
View ArticleRe: Galileo rtc wake-up possibilities ?
Just to add to the question - wakeup implies a sleep. How do you put the chip into a low current sleep state? Is wakeup a reboot, or continue from where you were? What is current drain while asleep?
View ArticleRe: No HDMI Audio output from DN2820FYK
You shouldn't need to reinstall for Windows 8.1. I know your SSD will not show up when you first disable Legacy Boot, but on the next boot it should show up. Jason
View ArticleRe: Is it possible to use intel galileo for bare metal programming?
hello, I connected intel galileo with olimex arm-usb-ocd-h debugger and could use the console as in the document provided on intel site. can i use this debug console to add my programs to intel...
View Articleissdfut 2.0.9 will not boot on old ibm thinkpad x41
I have installed a 525 60Gb SSD in my old ibm thinkpad x41 (by the use of a small PATA to mSATA interface card). When I try to boot issdfut 2.0.9 from a usb, it fails to boot past start of Xorg with a:...
View ArticleRe: Build debian Linux distribution for Galileo board with debootstrap
Hi Thomas_Faust_(Intel) Did you build from meta-clanton_v0.7.5 and edit /meta-clanton_v0.7.5/yocto_build/conf/local.conf changed the following line? DISTRO ?= "clanton-full" Debian installation I built...
View ArticleRe: PTV3000 and the latest intel driver issue
I updated the drivers and the same issue I mentioned above happened. Has there been any new developments on this?
View ArticleRe: iSSDFUT 2.0.9 Not Working?
having the same problem. Drive running very slow, and Negotiated speed of only 1.5 GB on mid 2009 Macbook Pro (details below). just installed brand new 240 GB 530 SSD. Downloaded and burned the ISO...
View ArticleSD Library Function Seek() for Ring-Buffer Not Working
I am newbie and have been experimenting with SD library to write a data logging routine that uses a file on the SD card to create a ring buffer. Data is written to a text file and when the file size...
View ArticleRe: Intel AC7260 problems
The 7260 drivers just can't cope with extreme WiFi interference. I have around 30 APs in range at my place and I used to get that issue at 2.4 GHz resulting to downloads and uploads being interrupted....
View ArticleRe: Installing an RS232 Shield (cutedigi)
As an update, I ordered a second shield from spark fun (RS232 Shield - DEV-11958 - SparkFun Electronics), but am still unsuccessful in establishing communications with my DEC Writer. For each RS-232...
View ArticleRe: No HDMI Audio output from DN2820FYK
Thank you, I hope intel can fix this with a driver fix. Why would hdmi audio require UEFI?
View ArticleWin 8.1 / HD4600 known issues
I've been searching these forums for a solution for 2 problems, but I can't find anything that satisfies my needs... There are 2 big problems that are more than just a little annoying1. Screen...
View ArticleRe: eth0 device not found with LSB image
Solution to this problem is in post 6 of this thread Re: BSP Updates
View ArticleRe: Galileo : Stability issues with WiFi and WebServer example
If it were me...I would keep a serial connection open to an in-house computer, so you have a trace of what Linux is doing.In my case it would be SSH using PuTTY over WiFi, although if your WiFi is...
View Article