Re: Intel SSD 530 NAND Write Problem
One thing that I have noticed for sure is that running HWMonitor greatly increases NAND writes. I run HWMonitor when launching a game for the first time to check temperatures. HWMonitor is stored and...
View ArticleRe: Where is the "Edison Native Application Guide" PDF?
I have a copy of that NAG ww33 331192-001 Sept 2014, and considering the advancements in just the last 12 weeks, I myself will be waiting for the new NAG when it comes out.
View ArticleRe: Intel SSD 530 NAND Write Problem
Jonnie, in your post I assume you mean NAND writes went up by 1 GB per hour, not host writes. Host writes would have been 0? Also, I notice that you have an Asus laptop. I am using an Asus Z87-A...
View ArticleRe: Cannot open the Arduino in win 7
Thinks, I have met the same problem too. When I use Locale-Emulator everything is find.
View ArticleHow to get start with the SD-Card Linux?
I know I have a stupid title because I have loads of questions and didn't find good answers yet. First, I got the Intel SD-Card Yocto (1.0.4), and successfully installed to my Galileo Gen 2, and wrote...
View ArticleRe: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
Can I suggest backing up a bit and doing some experimenting? Can you configure A4/A5 as output pins, and turn on LEDs with them (suitable resistors in series, of course)? If yes, the pins are ok, at...
View ArticleClik here to view.
Re: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
Hi Phil,I downloaded your zip file from posting 9 and it compiled fine using the Edison Arduino IDE 1.0.4. As for Wire library, it should be using the Edison version. On my machine it is at:...
View ArticleRe: Problem setting GPIO
On the Edison Mini Breakout board, GPIO-182 is PWM2 in Pin Mode 1 on J17-1. The MRAA number 0
View ArticleRe: Problem setting GPIO
Thanks. I've gone and set the pinmode to 1. When I want to use it in a python script, do I put it in as pin 182, or PWM2?
View ArticleRe: Problem setting GPIO
I haven't programmed in python, do you have your example script - I will compare it to what I have.In C, I would use the mraa number which is 0
View ArticleRe: Galileo Debian v1.2 image
Hi Stuart, I successfully install the Debian, but I still have few problems here: I have a wireless router out of my room, when I use the Intel official linux I could use the ethernet port to connect...
View ArticleRe: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
No scope to use. As I Mentioned earlier I tried the code on both the UNO and Teensy without any issues. Guess I'll try the use the pins as output.
View ArticleRe: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
Hi Kurt,My library is in the same place. I didn't try hunting around. Thought it was like the regular arduino IDE. Thanks for trying out the code.
View ArticleIntel HD Graphics x Nvidia Optimus x 3D Software Problem
Hi,I bought a notebook with processor Intel Core i7 4810MQ. This notebook comes with a Nvidia Card Geforce 980M, There is that Nvidia Optimus program installed which is supposed to switch cards when im...
View ArticleRe: D54250WYK, Samsung U28D590D, 4K-resolution not working
Since Intel's reps have been suspiciously quiet on this thread my next step would be to escalate through their customer service. Guys, let me know what your result on exchange/return is and I'll post...
View ArticleI have installed the latest firmware 3.8.7-yocto-standard , I can't do the...
I have installed the latest firmware 3.8.7-yocto-standard , and I can't do the telnet anymore . After i have uploaded the sketch to activate the telnet server with the following code below : void...
View ArticleClik here to view.
Solar Powered Edison concept - power considerations
Okay here is a concept for the group. I am wondering if Edison could be solar powered, and I am asking what kind of considerations would need to be made to ensure that it provides enough power to an...
View ArticleRe: USING A GY80 IMU WITH THE EDISON ARDUINO BOARD
Booth sets showed the same stuff on la, so tested with device connected to one set and la to other. As I mentioned the schematic shows them connected....
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Hi Alex, Just follow your suggestion, I have programmed debian into my edison successfully. Thanks! For not confusing other guys, we should put this fix into Emutex images. Also we can put the...
View Article