Re: Display issues on laptop
Hi Sylvia, I have made some progress by downloading an NVidia driver from my laptop manufacturer's website, rather than the generic driver as I had before. However, it would seem that the Intel driver...
View ArticleIOREF Jumpers
I was sure I had seen this somewhere but for the life of me, cannot find it - even googling. Can someone advise the jumper settings for the pin IO - I believe J8 and J9 are the magic jumpers but I have...
View ArticleRe: IOREF Jumpers
WHoops - when I mention Pin IO - of course I mean voltage settings. Stan
View Articlehow to register new snmp oid on galileo?
A link to a tutorial would suffice.I want to register an unknown oid on my galileo board and use it to retrieve a string.
View ArticleRe: i notice that gcc is installed, allowing native development
granted. You should be able to "opkg remove" unwanted packages (like gcc). I think AlexT added a "sudo" package into his repository posted in another thread of this forum.
View ArticleRe: i notice that gcc is installed, allowing native development
... or you bitbake your own image. It's not too complex and you can specify rootfs size, packages contained, ... yourself (also describe elsewhere on that forum)
View ArticleRe: i7 4790K temperatures
Hey Sampark! No, i don't think you should be satisfied with the results. 90+ deg is more than allowed for a CPU. The difference between Intel Thermal Test made by kawos and the rest of the stress test...
View ArticleRe: Galileo Debian v1.2 image
@StuartAnderson, Good job, I appreciate it. Im currently using your image in my galileo, but my robo peak USB display is not working when connected.I checked if the driver is installed using lsmod and...
View ArticleProblem with dual source alpha blending in Rpcs3 and PPSSPP with Intel...
i have Problems with Intel Grapics Hd 2000 in Rpcs3 it show blacksrean and crashs afterwards and in PPSSPP the same Proplems as in following treatrs Kingdom Hearts Birth by Sleep USA [ULUS-10505]...
View ArticleSpi transfer buffer possible bug.
When using the spi.transferBuffer I find that the CS line is not de asserted/asserted after each frame or 8bits of data, so the spi slave only sees 8bits of data instead of all the buffer. If I use a...
View ArticleEdison Forum "Popular Content"
There is starting to be a lot of great content on this board. But with all due respect to the wonderful contributions intel_jorge has given us, I'm pretty sure his one-line post from last September A...
View ArticleRe: Spi transfer buffer possible bug.
I do not think this is a bug.There are many spi devices that need frames that are longer then 8bit.
View ArticleRe: Edison Forum "Popular Content"
similarly: by now I know the "featured Maker" for Galileo and Edison ...
View ArticleRe: write error: No space left on device
well, it's not a bug but maybe a sub-optimal setting ...you can also set e.g. a maximum filesize
View ArticleRe: Edison opkg package repo created
a short online search for "python 2.7 socket" gave me 357000 hits ...
View ArticleRe: Galileo Debian v1.2 image
you would need to connect serial. On Gen1 via the audio Jack, on Gen2 via UART connector
View ArticleRe: Spi transfer buffer possible bug.
I understand that, and that would be the frame size setting that can be set, where mine is set to default or 8bit, but looking at various specs that I googled, each frame seem to need the cs asserted...
View ArticleRe: Error during Kernel Compilation: make: *** No rule to make target...
The log is in my workshop which I don't have access to right now. I'm running Ubuntu 14.04 Trusty x86_64.
View ArticleRe: Intel(R) 82577LC Gigabit Network Connection is not working
Hi Josendy, I understand from your first post you mentioned disabling the NICs, is that from the device manager or BIOS? Please try disabling the NIC in the BIOS (check if there is option...
View ArticleBoard DP67BG shows code 37, No beep errors
Hey guys so I just replaced my video card after the old one kicked the bucket and everything seemed to be working well, then all of a sudden the screen just freezes. I restart the computer, and the...
View Article