3 Pin ultrasonic sensor in galileo
Hi everyone At this moment i am trying to connect several ultrasonic sensor to my galileo. I know that pulseIn doesn't work in galileo. I make work a HC-SR04 sensor but what i need is detect distance a...
View ArticleRe: wpa_supplicant.conf disappears when booting galileo
a, yes - was referring to the image on https://software.intel.com/en-us/iot/getting-started
View ArticleThat help me getting started with Edison!
Shortest instruction getting Intel Edison up an running without any troubles:use Windows, both USB, format Edison drive FAT32, PuTTy on USB Serial Port 115200, upgrade Yocto Do NOT go the hard way...
View ArticleRe: How to create a public key with gnupg
Have you tried compiling ftp://ftp.gnupg.org/gcrypt/pinentry/pinentry-0.8.4.tar.bz2?Probably would require configure settings such as --enable-pinentry-qt4=no --enable-pinentry-qt4-clipboard=no...
View ArticleTurning Edison into an WLAN/WiFi Access Point
Turning Edison into an WLAN/WiFi Access Point:link - confirmed, working with mini breakout board as well just press the power button >4sec & <7sec sec and you willfind a hotspot with the name...
View ArticleThat helped me getting Edison running!
Getting started:Shortest instruction getting Intel Edison up an running without any troubles:use Windows, both USB, format Edison drive FAT32, PuTTy on USB Serial Port 115200, upgrade Yocto Do NOT go...
View ArticleTurning Edison into an iBeacon ...
rfkill unblock bluetoothhciconfig hci0 uphcitool lescanLE Scan ...63:58:79:E0:17:7C (unknown) In this example an Estimote Beacon was found!63:58:79:E0:17:7C (unknown)Ctrl+C Stop ScanOK Bluetooth Low...
View Article840 Evo is sometimes does not work on Asus UX32LN. Why?
I have a Intel 840 Evo 500GB and it is very good drive. But sometimes not working (not booting) on my ultrabook. The bios is detect device but not detect partitions. I don't understand this problems...
View ArticleRe: Intel AC7260 limited access after sleep
Going to toss my hat in the ring here. Just picked up a Dell Venue 11 Pro 7130 with an Intel Wireless 7260 AC and have experienced nothing but problems with it. Info:System: Dell Venue 11 Pro 7130OS:...
View Articlegot first bluetooth low energy (BLE) device connected!
… not really knowing what is missing on OS (except the gatttool) I finally got my BLE device connected, here is the trick: build 68 and using mini breakout board: rfkill unblock bluetoothhciconfig hci0...
View ArticleRe: Wireless AC7260 - Still not working with 17.0.2.5
I got my Intel ac7260 2 weeks ago and had alot of stability problems from the moment i installed it on my Acer aspire 5750G.I have a Netgear Nighthawk 7000 wich is a ac router but most of the time all...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
Mike, I finally (after several hours) got xFSTK compiling on Ubuntu 14.04 (32-bit). I didn't see drazvan's post until I was well stuck into the task. I'm doing up a HOWTO now, and will post in a...
View ArticleRe: ubilinux (Debian) now available from Emutex Labs
To be honest, when I was building the ubilinux distro, I didnt focus on Bluetooth at all, but the drivers and firmware are in there, so it's probably missing something small. Does anyone feel like...
View ArticleRe: When is the NUC refresh due?
Thanks Sylvia. I was just wondering if any new models were being readied for release in the not too distant future. From what I have read on the internet some i5 and i3 models will be release in Q1...
View ArticleRe: Wireless AC7260 - Still not working with 17.0.2.5
I have also pinged my default gateway but the problem still occours, the only difference is that the "avarage" ping is smaller ( with 17.0.0.34). Since i have changed my modem and renewed my wires but...
View ArticleBuilding xFSTK on Ubuntu 14.04 (32-bit) for flashing Edison
If you want to use the flashall.sh method of installing operating systems on your Edison, then it's more than likely that you'll need to install xFSTK. I've spent a few hours trying to get it building,...
View ArticleRe: Intel HD Graphics Need to Uncheck Send to TV
that worked unfortunately my graphics card doesn't seem to support a resolution the tv can display.Its a rather old hd tv so might be 480p. can i set a custom resolution for it?
View ArticleBIOS Version 0048 - BEH6110H.86A.0048. -NO DISPLAY AFTER UPDATE
Mistakenly updated From BIOS and, now no display, no booting, only fans work, motherboard light glows??? How to recover corrupted bios? Intel i5 3470 CPU@3.2GhzDH61WW - AAG23116-206 Please Help to...
View ArticleRe: Failed to start hostname server
i have found the problem.I had still on old firmware , i have updated it and all work fine.
View Article