Re: Edison -- Can't Flash
Ok, I tried a different cable (I had been using one from my MiFi, and used a more generic cable, redid the copy on windows, and it flashed. So, moral of the story, make sure you have KNOWN GOOD CABLES...
View ArticleRe: Problem to connect wireless keyboard and mouse to the USB3 connections
I'm having exactly the same problem as you when using my Logitech wireless touch keyboard K400r.It ran without a glitch at my WinXP Intel desktop PC but with the received in the front USB port of NUC,...
View ArticleRe: Edison IDE wont open!
Hello. I am using Windows 7 (Spanish, Colombia). I used the Arduino IDE for Edison and it worked ok, and days later installed the normal Arduino. After that it does not work. I do not receive any error...
View ArticleRe: INTEL CONSTANT WIFI DISCONNECTS *WE SHOULD SUE*
I believe we have finally worked out the problem AND the solution, The Intel Proset software is at fault with only particular routers and when the notebook is low on power.This is why its been a pain...
View ArticleClik here to view.
Re: Edison -- Can't Flash.... :(
I had posted this elsewhere as well. Upshot: I was using a MicroUSB cable from my MiFi, and apparently it has issues -- I changed to a generic MicroUSB cable, and redid the steps on Windows, and now...
View ArticleRe: HC-SR04 Sketch
the result is only one time0 CM left 0 CM right but if one of the timer is commented out then its able to get all the correct result in the loop
View ArticleSmart Parking Guidance System for IntelRPC
Team Name: Rapid InnovationsProject Title: Smart Parking Guidance SystemInterdisciplinary Team Members and Responsibility:Siddhata PatilKen Shaw ChangAmbrinAliMikey XGarrettBeleu Product Description:...
View ArticleRe: White terminal screen (no prompts) when flashing Edison on Arduino board...
Sergio, thanks for your quick reply. Sorry to say, though I was able to use mini com to confirm that my serial interface name was correct as previously used (following the Flashing Edison (wired)...
View ArticleRe: Bricked Galileo? Assert EFI ERROR
My Galileo Gen1 isn't detected by Windows Device Manager any more. I used to have a COM5 port, now I don't. I've tried reflashing your image after I ran platform-patch-data.py on it using my Dediprog...
View ArticleRe: HDD click (excessive load-unload cycles)
@Intel Staff: I would like to start by saying that I'm not upset with any single individual here, but at Intel as a whole. People have been coming to this thread for months now, providing Intel with...
View ArticleRe: Intel® Wireless-N 7260 - slows
Hi Joe Does the issue occur in 2.4 or 5 GHz? Occur in both but worst on 2.4 GHz. I am using driver 17.1.0.19 (21Jul2014). I think is is related to N also as my router supports abgn only.What is your...
View ArticleRe: Intel® Wireless-N 7260 - slows
I updated to 17.12.0.4 and turned off APSD on both the router and the computer and it seems to be working (or at least I'm no longer getting limited connectivity. It's been up for a few hours without...
View ArticleRe: Galileo 2 Bricked
Hi Jesus, I am having a bricked issue; see this post https://communities.intel.com/message/253456#253456I have tried using my Dediprog SF100 with no success of having Windows see the Galileo's COM port...
View ArticleClik here to view.
"Start a Project" doesn't work
I have included the screenshot. When posting a project, using "Share Your Project" it asks for "please select at least one category"—except there is no input field for this. Anyone else have this...
View ArticleClik here to view.
Re: Intel® Wireless-N 7260 - slows
HpmaxWhere do you get the new driver? Is it offical or unofficial?
View ArticleRe: Wireless card stops working after hibernate with 17.1.0.0
Well, this is strange. Originally, I had downloaded and installed the Wireless_17.1.0_s64 Intel PROSet/Wireless WiFi Software (includes Drivers) I removed everything after my hibernate problem and...
View ArticleRe: Build Intel Edison Yocto Image From Scratch
Excellent! I have done the same and I now have a Yocto dev environment that I can use to customize the Linux side of the Edison. Thanks!
View ArticlePower options for Edison mini-breakout board
Hello everyone, I'm waiting for my Edison Board + Mini Breakout to be delivered and I was wondering how I'm supposed to power it. As far as I understood, I can either apply 7-15V on J21 or use the USB...
View ArticleRe: Intel (R) Dual Band Wireless-N 7260 issue
Thanks for the reply's. I've tried looking around on my router settings but no luck. I'm unaware of whitelist to be part of my laptop but, I'll contact Dell and see it is.
View ArticleRe: How to get I2C commo using Edison Arduino breakout board?
Thanks, I got the I2C to "work" using A4/A5. Not sure why SDA/SCL on the digital pin jumper doesn't work. I can read the I2C address of the sensor most of the time, but often it still reports no I2C...
View Article
