Quantcast
Channel: Intel Communities: Message List
Browsing all 17928 articles
Browse latest View live

Re: Edison Mini-BreakOut Board Documentation Woes...

J21 is is for 7-15v (actual valid input range might lower/higher, but 7-15v will work) input into the TPS62133 which provides 5v to the rest of the board. The pin closest to the edge of the board (with...

View Article


Re: Windows 8.1 HD4000 cannot update driver

Hi good afternoon   I have the same problem but with windows 8 64bit the laptop is new is 4 months is a acer aspire 772g V3 I'm trying to update the video driver for the Intel HD 4600 and tells me my...

View Article


SSD 530 Blue Screen when starting Intel SSD Toolbox

I just installed the SSD 530 (480GB) into my PC and every time I try and start the Intel SSD Toolbox I get a Blue Screen and my system crashes. What do I need to do in order to properly use the Toolbox...

View Article

Re: Intel Wireless-N 7260 fails to connect WLAN and Bluetooth with Windows 8.1

Tried this drivers in a clean Windows 8.1 installation: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24220 Always same problem. Seems to work good for few minutes, and then while...

View Article

Image may be NSFW.
Clik here to view.

BIOS updating problem - DH61BE board

Hello all,I have a DH61BE that on which I am trying to update the BIOS.  I have been able to update my 0020 to 0048 using Windows update file. According to literature, I need to use the .bio file using...

View Article


Re: Is there any gps breakout board or shield that work with intel galileo ?

Hi Amey, Since you have the WiFi connection you can send the data to your PC without taking out the SD card.  Regards,Diego.

View Article

Re: How can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...

Wait, so when you click the "Mark drive as normal" link next to a failed drive in the Intel RSTe application, all of the array information is destroyed and it is immediately impossible to recover from...

View Article

Re: BIOS updating problem - DH61BE board

Hi Sylvia, Thank you for your input.  I did move from 0020 to 0041, and I might have updated to one of the others along the way.  The system is working fine, but there are some performance issues that...

View Article


Re: Where is the IoT dev kit ?

Hi gowri_somanath, This is the site for the IoT https://software.intel.com/iot . Also take a look at this post from mhahn, you might find it useful as well https://communities.intel.com/thread/54984....

View Article


Re: Failed to access the USB through python.

Hi BG4BMH, Regarding the libusb, you could try with AlexT repo, I haven’t tried that package, but hopefully it will work for you. Take a look at this post...

View Article

Re: Accessing intel galileo from Android

Hi anbu369, Are you still having the same issues? I'd suggest you to try to execute the gphoto2 command as a Linux command, then as a Shell command and finally as a Subsystem command just to make sure...

View Article

Intel HD 4000 Driver

Hi, I haven't seen a new driver for the HD 4000 for quite a long time.is the new driver under works? any ideas when the next driver for the HD4000 will/would be? a swift reply is most appreciated....

View Article

Re: Intel (R) Dual Band Wireless-N 7260 issue

Perhaps you can try connecting at 5 GHz if the router supports it.The system manufacturer may be able to provide you with a better suggestion regarding your last question.

View Article


Re: Cannot find /dev/cu.usbserial[n] when flashing Edison on Mac OS X Yosemite

Thanks Sergio. I see "Edison" in my Devices section of Finder now. I was able to copy the files over to the Edison, but when I start typing "screen /dev/cu.<TAB>", all I see is screen...

View Article

Image may be NSFW.
Clik here to view.

Windows Server 2012 R2 keeps crashing after "Getting devices ready"

Hi everyone,Having a bit of a problem here. Here's the situation: Server was running Server 2008 R2 Entreprise, had to upgrade to Server 2012 R2 Standard, and I can't seem to boot into Windows ever...

View Article


Re: NUC D54250WYKH not booting

There has been a new discovery. I started to play with the memory kit I received, and I found the following: 1) NUC BOOTS regardless of which one of the 2 memory SODIMMs I installThis is what the BIOS...

View Article

NUC D54250WYKH not booting (Memory Socket problem?)

Hi,I have bought a NUC D54250WYKH (The box says it is version# H26246-102).I bought memory from crucial, which they guarantee will be compatible for this NUC:CT5042585 BLS2C8G3N18AES4CEU.16FER 16GB...

View Article


Intel Celeron N2815 vs 1007U

The site CPUBOSS say that the Celeron N2815 have a 1MB of L2 Cache and the 1007U 0,5MB.The Intel site says that the Celeron N2815 have 1 MB of Cache and the Celeron 1007U have a 2MB of Intel® Smart...

View Article

Re: Intel HD 4600 cannot display 2560x1440?

Hello all!I have the same problem, can't use 2560x1440 (which is nativ to my display). There are the adapter infos: File Intel(R) HD Graphics 4600.txtI don't see any option for 2560x1440 in the display...

View Article

Re: UVC Driver Support

Hi, I have compiled a document. 1. Build the image as described in the Board Support Package document. 2. Open the menu config to add the UVC driver support in the driver.     build> bitbake...

View Article
Browsing all 17928 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>