Re: Can't play BluRay discs with Intel HD 4600?
Thanks for your reply Allan and helpful link. As you can see from the above post and my reply, the problem wasn't compatibility with BluRay but compatibility with the Intel HD 4600. Power DVD 8 was...
View ArticleRe: Intel 7260ac support 802.11k
Based on feedback on other forums, it would appear that the 'Quiet IE' field is what the 7260 is having problems with.
View ArticleD54250WYK fails to present HDMI output upon wakeup
Hi all, My D54250WYK fails to present HDMI output when started from other than powered off state.It happens with BIOS 026 and 027. This only occurs when my Pulse-Eight usb-cec adapter is connected.When...
View ArticleRe: Installing mysql on galileo
Thanks for your reply AlexT_Intel, I just entered to your blog post but not able to redirect to the link which contains "devtools" image Download and Unzip it to your SD card. . Can you provide me that...
View ArticleClik here to view.
Re: graphic driver for Atom N2800/Windows 7 settings - bad contrast
Hello Joe,we tried this Drivers, but the Problem is, that the GMA3600 Driver ignores or misunderstands settings from the bios, so when we install driver, the picture becoms bad. Is there a possibility...
View ArticleRe: Re: I Compiled the Poky Distribution. Now what?
Thanks Alex.. that worked.. I need another help.. I dont have the R232 serial cable so I want to use the normal usb cable to ssh into the board.. when I use the arduino sketch to ssh into the board...
View ArticleDCCP847DYE powered by a 11.1v lipo battery?
Hi, I've read in other forums that users are able to power some NUC boards with 11.1 volt lipo battery? Is this specific board ( DCCP847DYE ) possible? Thank youEric
View ArticleRe: Specifying flags at compilation
I meant the environment in which you develop your code for Galileo. I believe the current version is 1.5.3. I usually compile the programs inside this environment. However, I don't know of a way to...
View ArticleRe: Intel Verilog-A FASE SATA model issue
Hi,MaxstringerI also met the same issue, "Don't know how to use Intel Verilog-A FASE model to do simulation." Do you overcome this problem?
View ArticleGaining shell access in Galileo linux enviornment
I would like to get shell/terminal access to the linux OS running on a Galileo board but have been unable to. Eventually I would like to get to the point where I can compile my own project directly on...
View ArticleHaving problem with Ipazzport mini keyboard and mouse pad on Intel NUC
I have the i5 version of the NUC and I am having difficulties getting my Ipazzport PK-810-18v to work properly. It's a 2.4ghz mini keyboard and mouse remote. I connect the USB dongle and the drivers...
View ArticleClik here to view.
Re: Not able to start mysql prompt
Then also not able to do so SpiderKenny, found some error which never I faced.See the attached image for error.
View Articleh87 raid5 write slow
hi, I have a H87 board with chip and processor XEON 1220 V3+ 12GB DDR3 1600 V3 installed on a 64GB ssd, data on a raid 5 5X 4TB RED CAVIAR. The read speed is good but the writing does not exceed 40MB....
View ArticleRe: DN2820FYKH resolution scaling problem
let me quote from my original post In intel HD graphics panel, when i try to set different resolutions starting from 1680x900, i do get scale options. however on 1360x768 or lower resolutions i only...
View ArticleClik here to view.
WiDi Remote not opening.
Hello all, recently I've been having problems opening my WiDi Remote program, though Intel Widi itself seems to be working. I've tried uninstalling and reinstalling Remote, but to no avail. Any...
View ArticleHD 4600 in i7-4770K with 2 monitors hangs coming out of sleep
I am having an annoying problem with the 4600 GPU that when the computer is brought out of sleep the screens are frozen for about 5 to 10 seconds and then a message appears that the 4600 driver has...
View ArticleRe: 32 bit to 64 bit
Yes, the E8600 supports the 64-bit instruction set. ARK | Intel® Core™2 Duo Processor E8600 (6M Cache, 3.33 GHz, 1333 MHz FSB) Doc
View ArticleUnable to print from within the Galileo console
I am using this linux image Prebuilt eglibc-based linux image and package repository which has CUPS package included alreadyConnecting to the board through PuTTY via sshI am unable to print text...
View ArticleRe: 请问DH61AGL的SATA电源输出口的供电能力是多少？
非常感谢您的回复！ 另外我也想问下DQ77KB这款主板的的sata供电参数，这个技术手册上也没有写。dn2800mt和dh61ag/l的供电能力大体上就是两块HDD吧，到是正好和两个sata数据接口相符。但dq77kb有4个sata数据接口，其sata电源供电能力是否更强一些呢？
View ArticleRe: Your website is bad and you should feel bad - hyperlink/driver issues
Bump...I would like an answer to these questions.
View Article