Hi
no way, I gave up months ago on this and on the board at all. I felt it was too early. Now I'll try with the recent 1.00 (or 1.02 if I'm not wrong) but don't know when.
Antenna is not an issue at your (our!) stage.
I was able to have my board recognized only for the bluetooth part. A lspci command must show the board if properly configured
You may have connection issues without antenna or if distant but this should be worked out only after being sure lspci tells the board is working.
My tentative (at 8 months ago) was to rebuild the entire distribution (the sd image) doing a rebuild of yocto and, before that, telling the kernel the 3945 driver should be there with a make configure. I was however unable to build a working distribution because you have to do the configuration in the proper way, e.g. not adding pieces or manual configuring but modifying the proper yocto build recipe(s?). So understanding how Yocto is compiled is quite mandatory.
I cannot promise that I'll try again... but in case I'll post on the forum for sure!
cheers and good luck!
Ivan